ICI Caldaie WALL | Hevac
  • Submit an Enquiry
  • Price Books
  • Flue Installation
  • SEAI Triple E

ICI Caldaie WALL

ICI Caldaie WALL View Large Image

WALL condensing boiler, with both European and Italian Patent designed by ICI Caldaie for high power in contained spaces. Particular boiler geometry together with large heat exchange surfaces allow considerable fume temperature reduction resulting in 109% efficiency achievement (referring to PCI and Temp. Delivery/Return 50/30 °C). Latest concept burner, 20% to 100% Nominal Power pre-mix flame modulation. Reduced environmental impact achieved by under 10 ppm NOx emissions. 

  • Large Combustion Chamber, passing flame with dry and low thermal load reversal chamber
  • Crossed groove, W stainless steel, high concentration fume duct
  • Reverse double slope structure for condensate integral recovery, high and low temperature double return.
  • Parts in contact with combustion products - combustion chamber and gas plates - are entirely made out of AISI 316 Ti titanium stabilized stainless steel.
  • Cascade operation in advance setup with 125 kW and 150 kW modules having a maximum of 4 boilers, reaching a maximum power of 600 kW reached using condensing operation.
  • Modulating gas burners with total gas pre-mix, heat radiating cylindrical body, low NOx emission (below 10 ppm)
  • 20 to 100% maximum power adjustment.
  • 109% COP (coefficient of performance), 50/30°C boiler water temperature
  • Each module is equipped with a digital control panel for burner modulation management and climatic compensation for fluctuating temperature.
  • AISI 316 L STAINLESS STEEL external casing, internally insulated with high density,thick mineral wool mattress.
  • IPX4D protection
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.