ICI Caldaie TNOX.e MTHW (2500-6000) | Hevac
  • Submit an Enquiry
  • Price Books
  • Flue Installation
  • SEAI Triple E

ICI Caldaie TNOX.e MTHW (2500-6000)

ICI Caldaie TNOX.e MTHW (2500-6000) View Large Image

TNOX.e (2500-6000)
Three pass, wet back boiler, suitable for liquid or gaseous fuel pressurized combustion, intended for heating systems with duties ranging between 2500 and 6000 kW and temperatures higher than 100 °C. It also features heat exchange acceleration elements to ensure highest possible efficiency of its category. Designed for 110°C maximum temperature (available for 10 bar designed pressure). In compliance with EN 303 European norm and has a CE label according to 2009/142/CE Gas Directive. 

  • P265GH UNI EN 10028/2 and P275NH UNI EN 10028/3 quality steel boiler body welded and tested with approved methods
  • -Horizontal, single pass flame combustion chamber, with possible corrugated section.
  • Wetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.
  • Tube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds.
  • Plate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.
  • P235GH UNI EN 10216/2 smoke ducts, thickness 3.2mm, expanded and welded into the tube sheet, endowed with special turbulence inductors designed and dimensioned in order to ensure stated efficiency achievement.
  • Steel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control.
  • Insulated steel sheet posterior smoke box equipped with an easily opened door
  • can be removed using equipped bolts using brass bolts in order to clean the smoke pipes; provided with cleaning door and chimney connection
  • Support built form carbon steel sections able to support the entire unit.
  • Embossed metal sheet upper walkway for accessories service, parts located above the boiler
  • High density, mineral wool mattress, 80 mm thickness thermal insulation, with round embossed aluminium case.
  • Accessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.
  • Electrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.