ICI Caldaie TNOX BT Condensing | Hevac
  • Submit an Enquiry
  • Price Books
  • Flue Installation
  • SEAI Triple E

ICI Caldaie TNOX BT Condensing

ICI Caldaie TNOX BT Condensing View Large Image
HICITNOXBT

TNOX BT COND

Steel heat generator with 3 smoke ways, wetback, with integrated condensing unit serial connected to the generator, suitable for gaseous fuel pressurized combustion, intended for large heating systems with power ranging between 3500 and 7000 kW and operating temperatures between 40 and 100 °Designed for a security maximum temperature of 110°C. In compliance with EN303 European norm and has a CE label according to 2009/142/CE Gas Directive. 

  • P265GH UNI EN 10028/2 and P275NH UNI EN 10028/3 quality steel boiler body welded and tested with approved methods
  • Horizontal, single pass flame combustion chamber, with possible corrugated section.
  • Wetback combustion supported and connected to a tube of 500 mm diameter with manhole facility.
  • Tube plates with drilled holes and then subsequently re-bored for smoke tube welded and expanded; the tube plate front the reverse chamber is completely flanged towards the combustion chamber, with butt welds rather than T-Butt welds
  • Plate containment with flanged PN 16 or PN 40 EN 1092-1 connections for equipment operation; equipped with man-hole, and head-hole, and lifting eye bolts.
  • P235GH UNI EN 10216/2 smoke ducts welded to tube plates, possibly fitted with helical turbulators, manufactured with a double tube and differentiated contact with non-condensing feature (minimum temperature return 35 °C) - condensing heat recovery unit to integrated in the rear part of the generator with thermal exchange sections consisting in AISI 316 Ti stainless steel plates, printed with patented shape, allowing the formation and drainage of condensate
  • Hydraulic manifold for series connection between condenser and generator, complete with expansion joint
  • Single steel sheet front door, thermally insulated refractive materials with high aluminium content, mounted on adjustable hinges, easily opened by hand wheel bolts without the need to remove the burner; equipped with light indicator for combustion control
  • Posterior smoke chamber made from sheet AISI 316 Ti stainless steel, can be dismantled using the bolts; equipped with condensate drain coupling and exhaust connection
  • Support built form carbon steel sections able to support the entire unit.
  • Embossed metal sheet upper walkway for accessories service, parts located above the boiler
  • High density, mineral wool mattress, adequate thickness thermal insulation, with round embossed aluminium case.
  • Accessories equipment needed for automatic operation with mechanical and hydraulic assembly for all equipment.
  • Electrical wiring converging to a single centralized control panel, having silicone insulated wires inserted in PVC protective sheaths all subjected to final functionality test for each
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.