Nuaire Eco Smart Controls | Hevac
  • Submit an Enquiry
  • Price Books
  • Flue Installation
  • SEAI Triple E

Nuaire Eco Smart Controls

Nuaire Eco Smart Controls View Large Image

Nuaire Eco Smart Controls

  • Simple to Install - All controls are pre-assembled, configured and installed directly into the fan or air handling unit, this includes 3-port motorised valves and actuators, pipework, off coil thermostats and sensors, frost protection, etc. Site time kept to a minimum, quality and efficiency maintained.
  • Simpler Systems - No need for main VCD, no wasted energy or noise generation because the air volume can be precisely set via the integrated speed control, minimum and maximum speeds easily adjusted via Ecosmart commissioning panel.
  • Simple, Precise Commissioning - As recommended in Part L, Ecosmart enables the system to be accurately commissioned via an integrated speed control, minimum and maximum speeds easily adjusted via commissioning panel integral to the control.
  • Quieter Systems - With Ecosmart your system is only at maximum design duty when absolutely necessary. The noise levels within your systems are lower because the fans or air handling units are rarely at full speed.
  • Improved Lifecycle - Ecosmart enables the fan or air handling unit to be run at lower speeds. This reduces the maximum load and wear and therefore increases the overall working life of the units.
  • Demand Ventilation - Only ventilates the area when you want it to - why fully ventilate a room when it’s not occupied? The maximum savings possible can be achieved.
  • Healthy Atmosphere - Ecosmart has a trickle function as standard which when activated, via a simple switch, enables you to set a background ventilation rate, keeping the rooms fresh when unoccupied, whilst still saving energy. System will boost or ramp to maximum design duty when triggered by an Ecosmart or other external device.
  • Plug In Controls - Simple low voltage sensors complete with preplugged cable means that any control function is easily achieved. You decide which conditions to monitor and the system will operate at the optimum speed.
  • BMS Interface - Integrated BMS features enable any central system to control and monitor the fan or air handling unit via 0-10V signal. This enables full speed control and heating or cooling enable if installed and volt free status indication as standard.
  • Peace Of Mind - Ecosmart has a 5 year warranty. 1st year Parts and Labour with remaining years parts only. For further details contact Nuaire.

Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.