Wilo Voda Air/Dirt Seperator | Hevac
  • SEAI Triple E

Wilo Voda Air/Dirt Seperator

Wilo Voda Air/Dirt Seperator View Large Image
HWVODAAD

Wilo-Voda Air/Dirt 50-200F (PN10)

Optimum air and dirt separation combined with energy efficiency. Air and dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles, increase comfort and improve the yield. Air and dirt separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system. Separator constructed in steel with Dual Zone Flow Diversion technology.

Wilo-Voda Air / Dirt is the ideal solution for continuous purging and de-fouling of closed heating and cooling water circuits in commercial buildings. The combined functions of the air and dirt separator protect the boiler, pumps and pipe connections of large sealed heating and cooling water installations. They eliminate, on the one hand, all of the air and, on the other hand, the deposits of polluted particles present in the water of the installation and therefore extend the service life of pumps, control devices and more. system accessory. Wilo-Voda Air and Dirt offer additional advantages when used in older generation systems or when converting an open system to a closed system.

  • Prevents deposit of dirt particles in the boiler.
  • The removal of dirt particles from the system water extends the service life of pumps, control equipment and other system accessories.
  • With flanged connection according to EN 1092-1 PN16.
  • Integrated dirt scraper with magnet attraction for high efficient separation.
  •  Constant performance during the entire lifespan.
  • Low maintenance. ƒ Maximum working pressure: 10 bar.
  • Suitable for systems with a maximum flow temperature of 120 °C.
  • Maximum flow velocity: 1.5 m/s.
  • Suitable for addition of glycol-based anti-freeze up to 50 %.
  • In accordance with Pressure Equipment Directive 2014/68/EU.

Your advantages:

  • Higher efficiency of heating and cooling water systems thanks to the intelligent “open-close” principle of the float valve
  • Higher reliability and reduced maintenance of all pump and boiler system components thanks to the removal of exhaust air and polluted particles from the system
  • Simple and efficient dismantling, including magnetic particles for flanged variants
  • Reduction of the sound level thanks to the efficiency of the purge
  • All-in-one solution thanks to the combined functions of degassing and cleaning
  • Air and dirt separator.
  
Technical characteristics:
  • Maximum working pressure: 10 bar
  • Maximum working temperature: 120 ° C
  • Maximum flow speed: 1.5 m / s
  • Recommended for the addition of up to 50% glycol-based antifreeze agent
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.