Lochinvar Amicus Boost | Hevac
  • SEAI Triple E

Lochinvar Amicus Boost

Lochinvar Amicus Boost View Large Image
HLVARAMICUSBOOST

Amicus Boost water source heat pumps

Amicus Boost heat pumps are designed for hybrid heating/hot water systems. They can integrate with Amicus LT air source heat pumps, high efficiency gas-fired boilers and water heaters, fast recovery electric water heaters and waste heat recovery systems. Ten models provide heating capacities from 38.8 to 273.2Kw and include the following features:-

  • COP up to 5.14
  • SCOP up to 4.47
  • High operating temperatures – up to 78ºC
  • Stage compressors
  • Integral controls
  • Indoor installation

Amicus Boost heat pumps are designed for use in hybrid heating and hot water systems; they can be installed in conjunction with Amicus LT air source heat pumps, for which Lochinvar can provide all major components, providing the convenience of a single supplier solution.
They can also operate with heat recovery/ reclaim systems.

Both can help to reduce capital cost, when compared to a standalone air source heat pump system, and will provide high levels of operating efficiency all year round.

 Key Features:

  • Heating capacity up to 496kW
  • Designed for use with heat recovery/reclaim systems
  • Operates at temperatures of up to 78°C
  • COP up to 5.14
  • SCOP up to 4.47
  • Stage compressors

The efficiency of a heat pump is often expressed as COP; this is the ratio of heat output available from a single unit of heat input. Amicus Boost have COP of up to 5.14, which could also be described as an efficiency of up to 514%. COP is calculated at a specific ambient temperature of 7°C and at a flow temperature of 30 to 35°C.

Amicus Boost heat pumps have an acceptance temperature range of 10 to 35°C, so Heat Sharing Networks (Ambient Loops) can be an effective water source the Boost Heat Pump can utilise.

All Amicus Boost units can deliver high temperatures to a Heating or Hot Water system with a localised efficiency in excess of 500%.

Integral Controls amd Factory Fitted Options

  • BMS On/Off signal
  • BMS Alarm signal
  • Heating and DHW control with DHW priority

Ancillary, Factory Fitted Options

  • Anti-vibration mountings
  • Soft start
  • Remote control

Hybrid Heating/Hot Water Systems

Amicus Boost heat pumps can combine with other products to provide low carbon, highly efficient heating and hot water systems. They are particularly suitable for installation with:

  • Amicus LT air source heat pumps
  • High efficiency gas-fired boilers
  • High efficiency gas-fired water heaters
  • Fast recovery electric water heaters
  • Waste heat recovery

https://lochinvar.ltd.uk/amicus-boost-water-source-heat-pumps/

Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.